300字范文,内容丰富有趣,生活中的好帮手!
300字范文 > [Latex] 插入图片 | 插入表格 | 符号 文本粗体 | 单栏 双栏添加行号 | 添

[Latex] 插入图片 | 插入表格 | 符号 文本粗体 | 单栏 双栏添加行号 | 添

时间:2022-05-27 14:51:49

相关推荐

[Latex] 插入图片 | 插入表格 | 符号 文本粗体 | 单栏 双栏添加行号 | 添

1. 插入图片

添加图片

使用福昕编辑器进行裁剪,然后(将图片统一放入picture文件夹):

\begin{figure} (双栏占一栏)

\begin{figure}[h] % 可选,h这里;t顶部;b底部。\centering\includegraphics[scale=0.6]{picture/model} % [width=\textwidth][width=\linewidth]\caption{This is a caption}\Description{This is Description}\label{fig1}% label用于后续引用\end{figure}

其中方括号[]中的内容为可选项,width=\textwidthwidth=\linewidth在单双栏会有些不同。

\begin{teaserfigure}(双栏占两栏)

\begin{teaserfigure}

\includegraphics[width=\textwidth]{pic/model}

\caption{This is a caption}

\Description{This is Description}

\label{fig1}

\end{teaserfigure}

在正文中,

引用该图片的时候:~\ref{fig1}

Note:

如果是两栏,上述显示的图片只占其中一栏;将\begin{}\end{}中的figure改为figure*后,会占据两栏。其中\includegraphics后的[]可以根据情况进行更改。

[scale=0.6],指按原始图片0.6比例进行缩小。

[width=\linewidth],宽度按照页面宽度进行。

[width=0.4\textwidth,height=0.3\textwidth],分别对宽度、高度进行缩小。

2. 插入表格

\begin{table}[h] % 可选,h这里;t顶部;b底部。\caption{This is a caption}\label{tab1}\begin{tabular}{c|cc} % 有多少列就有多少个c,c|c表示列之间有竖列。(c居中;l左;r右)\toprule % 上部线1 & 2 & 3 \\\midrule % 中间线1 & 2 & 3 \\\bottomrule % 底部线\end{tabular}\end{table}

有多少列就有多少个c,c|c表示列之间有竖列。

3. 符号、文本粗体

\boldsymbol % 给符号加粗体(向量、矩阵)\mathbf % 给符号加粗体(向量、矩阵)\textbf % 给文本加粗体

4. 单栏、双栏添加行号

单栏

\usepackage{lineno}\begin{document}\linenumbers % 开始编号(文章内容)\nolinenumbers % 结束编号,若要全文编号,该条命令可不加(表示一直编号到最后)(通常.bib文件放在这里,因为参考文献不必编号)\end{document}

双栏

\usepackage[switch]{lineno}\begin{document}\linenumbers(文章内容)\nolinenumbers % 结束编号,若要全文编号,该条命令可不加\end{document}

每一页都重新编号

\usepackage{lineno} \begin{document}\pagewiselinenumbers% 按页重新编号\switchlinenumbers

5. 添加空格

\qquad % 2m\quad % m\ % 1/3m\; % 2/7m\, % 1/6m\! % 紧贴

6. 注释快捷键

ctrl+T

7. 维度

\mathbb{R}^{d}

8. 脚注

\footnote{}

9. 公式

单个公式

\begin{equation}(公式)\end{equation}

多个公式

\begin{equation}\begin{aligned}(公式1)% 中间的=用&=(公式2) % 中间的=用&=\end{aligned}\end{equation}

10. 分点

\begin{itemize} \item\item\end{itemize}

补充

1)\noindent 顶格

2)\sum\nolimits_{} 在正文实现上下标在右侧

3)\textsc 大写字母,首字母再大写

4) \clearpage 重新起一页,通常使用在添加附录页时

5)特殊符号

\blacktriangle\blacktriangledown,分别为实心正三角和实心倒三角。

参考:

Latex中插入图片:/qq_35091353/article/details/111403178【Latex】latex导入svg图片:/dl962454/article/details/114479159【InkScape+LaTeX】如何绘制矢量图并优雅地用在LaTeX文档中?:/video/BV1V7411u7cg?p=2latex在论文中添加行号:/weixin_38314865/article/details/111031001关于LaTeX空格命令的心得分享:/p/411399241

另:添加svg矢量图

将.svg图片转为.pdf图片,下载并安装:/release/all/windows/64-bit/exe/

记得选择,添加到PATH,否则后续要手动添加:

在需要转换的svg图片(demo.svg)下进入cmd,输入:

inkscape -D --export-type=pdf --export-latex demo.svg

[Latex] 插入图片 | 插入表格 | 符号 文本粗体 | 单栏 双栏添加行号 | 添加空格 | 注释快捷键 | 维度 | 脚注 | 公式 | 分点 |

本内容不代表本网观点和政治立场,如有侵犯你的权益请联系我们处理。
网友评论
网友评论仅供其表达个人看法,并不表明网站立场。