橡胶圆柱,rubber cylinder
1)rubber cylinder橡胶圆柱
1.Cavity and bifurcation in an incompressiblerubber cylinder;不可压缩橡胶圆柱的空穴和分叉
2)cylindrical rubber spring圆柱橡胶弹簧
3)rubber column橡胶柱
英文短句/例句
1.a plate makes an inked impression on a rubber-blanketed cylinder, which in turn transfers it to the paper.图版是用带墨印的橡胶柱体制成的，它可以转动着印到纸上。
2.The Analysis of Laminated Rubber Bearing Tandem Column System Stability叠层橡胶支座与柱串联隔震体系稳定性分析
3.Determination of rubber latex ethylene content and its variation by capillary gas chromatography毛细管柱气相色谱法测定橡胶树胶乳中的乙烯含量及其变化
4.rubber materials for vibration isolators防振橡胶用橡胶材料
5.silicone rubber硅(氧)橡胶, 硅酮橡胶
6.EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF RC COLUMN WITH RUBBER LAYER BUILT IN ITS PLASTIC HINGE塑性铰区埋入高阻尼隔震橡胶后RC柱抗震性能的试验研究
7.Properties of fluoroelastomer/ethylene-propylene-diene rubber blends氟橡胶/三元乙丙橡胶并用胶的性能
8.Carbon black for use in rubber industryGB3778-1994橡胶用炭黑
9.a coffee [rubber, sugar] plantation咖啡 [橡胶,甘蔗] 园
10.latex from tapped rubber trees.乳胶从橡胶树中抽出。
11.Rubber transfusion tubesGB4491-1993橡胶输血胶管
12.treated, coated, or impregnated with rubber.用橡胶处理，涂上或注入橡胶。
13.Rubber board and Rubber Research Institute of India印度橡胶局与橡胶研究所
14." Rubber, vulcanized--Classification--Rubber materials"GB/T16589-1996硫化橡胶分类橡胶材料
15.hardness testing methods for rubber, vulcanized or thermoplastic硫化橡胶及热塑橡胶硬度试验方法
16.testing method for synthetic rubber sbr合成橡胶丁苯橡胶试验方法
17.The trunk of the rubber tree emits drops of liquid rubber.橡胶树的树干流出一滴滴液状橡胶。
18.testing methods for synthetic rubber br合成橡胶聚丁二烯橡胶试验方法
相关短句/例句
cylindrical rubber spring圆柱橡胶弹簧
3)rubber column橡胶柱
4)rubber cylinder橡胶圆筒
1.Analyzing the problem of large strain contact for arubber cylinder;橡胶圆筒的大应变接触问题分析
5)rubber circular plate橡胶圆板
1.Therubber circular plate is considered as a kind of film.将橡胶圆板视为薄膜 ,根据薄膜的无矩特性 ,巧妙采用数学方法求得橡胶圆板的膨胀状态几何特性描述 ,进而通过应力应变求得挠度与载荷的关系。
6)rubber cylindrical tube橡胶圆管
1.Therubber cylindrical tube and the membrane inflatable tube have received the attention of researchers at home and abroad because of their important theoretical significance and engineering background.橡胶圆管与薄膜充气管因其具有重要的理论意义和工程背景而引起了国内外许多学者的注意。
延伸阅读
橡胶模具、橡胶压模、橡胶硫化模分子式：CAS号：性质：又称橡胶模具、橡胶压模、橡胶硫化模。用于压制橡胶产品的金属模型。一般用钢材(如45号钢)按图纸要求经机械加工而制得，并经热处理以提高其硬度及耐磨性。模具型腔与产品结构相同，型腔尺寸必须考虑不同橡胶的收缩率，在产品尺寸基础上进行放大或缩小，方可得到合适的产品尺寸。模具从工艺操作考虑还要设置流胶槽、启模口、定位销等。
