螺杆挤出机,screw extruder
1)screw extruder螺杆挤出机
1.Design of electric control system ofscrew extruder for tread wrapping production line;胎面缠绕生产线螺杆挤出机电气控制系统的设计
2.Thermal Entrance Effect in the Lubrication Clearance of a Screw Extruder;螺杆挤出机润滑间隙内温度入口效应
3.Study on optimizing design ofscrew extruders and it"s application螺杆挤出机优化设计的现状及发展
英文短句/例句
1.Technological Progress in High Speed Extrusion of Single-screw Extruders单螺杆挤出机高速挤出技术研究进展
2.Advance in numerical study on performance of screw elements in screw extruder螺杆挤出机螺杆元件性能数值研究的进展
3.A Global Model for Polymer Flows in Co-rotating Twin Screw Extruder;啮合同向双螺杆挤出机挤出过程模拟研究
4.The Design and Analysis of the Novel Screw Extruder of Coextrusion in One Extruder;新型单机共挤螺杆挤出机的设计及分析
5.Characterization of Mixing Interface Tracing in Single Screw Extruder单螺杆挤出机混合过程界面追踪表征
6.Simulation of Flight Element Runner in Co-Rotating Twin Screw Extruder;啮合同向双螺杆挤出机螺纹元件流场分析
7.Numerical simulation of the mixing ability of the channel in a single-screw extruder单螺杆挤出机螺槽内混合特性的数值模拟
8.The main machine uses frequency conversions for speed requlation, and super-taper twin-screwextruder with temperature-regulating in the screw core.主机采用变频调速，螺杆芯部调温得超锥形双螺杆挤出机。
9.Study on a New Mixing Element and Screw Configuration in Intermeshing Co-Rotating Twin Screw Extruder;啮合同向双螺杆挤出机新型混合元件及螺杆构型的研究
10.Effect of Co-Rotation Twin-Screw Extruder Screw Assembly on Mechanical Performance of Glass Fiber-Reinforced AS同向啮合双螺杆挤出机螺杆组合对玻纤增强AS力学性能的影响
11.The Simulation System of Single Screw Extruder Plasticating;单螺杆挤出机塑炼过程的计算机仿真系统
12.On-line Measurement of the RTD in Twin Screw Extruders双螺杆挤出机停留时间分布的在线测定
13.Study on Local Residence Time Distribution in Twin Screw Extruder;双螺杆挤出机中局部停留时间分布研究
14.Online Measurement of the Residence Time Distribution in Twin-Screw Extruders;双螺杆挤出机停留时间分布的在线测量
15.Accurate Measurement and Control of the Output Rate of a Single-Screw Extruder;单螺杆挤出机生产率的精确测量与控制
16.Pilot Study on the Simulation System of Conical Twin-Screw Extruder;锥形双螺杆挤出机仿真系统的初步研究
17.Scheme Comparison and Strength Analysis of Drive System of Twin Screw Extruder;双螺杆挤出机传动系统的方案比较和强度分析
18.Processing Method of Screw for Conical Twin-screw Extruder锥形双螺杆削挤出机螺杆的加工方法
相关短句/例句
extruder[eks"tru:d?]螺杆挤出机
1.Ih this article, the author points out the necessity, methods and effects of technical reform on transmission system of theextruder with the frequency - varying controlling technics.提出了用变频控制技术改造螺杆挤出机传动系统的必要性，改造方法和效果。
2.The reclaiming mechanism and the technological process ofextruder reclaiming process for producing reclaimed rubber were reviewed.简介了螺杆挤出法生产再生胶的工艺原理、再生过程，以及由美国再生胶公司和沈阳化工学院开发的螺杆挤出机的结构特点和设计参数。
3)twin screw extruder双螺杆挤出机
1.Assembled Twin Screw Extruder Screw Elements in Processing of Biodegradable Starch Plastics;生物降解淀粉塑料加工中双螺杆挤出机螺杆组合
2.Application of importedtwin screw extruder in after-treatment of chloroprene rubber finishing;进口双螺杆挤出机用于氯丁橡胶后处理
3.The production of crushing material for white/bronze UPVC shapedwindow/door products on SJZ 60/125 concialtwin screw extruder;白色/古铜色UPVC门窗异型材破碎料在SJZ60/125型锥形双螺杆挤出机上的生产
4)Double screw extruder双螺杆挤出机
1.PA6/nano-SiO_2 composite was prepared by blending PA6 chips and nanosilica treated with silane coupling agent,and extruding with double screw extruder.通过熔融共混将表面经硅烷偶联剂改性处理的纳米SiO2与尼龙6(PA6)切片共混,以双螺杆挤出机制备了纳米SiO2增强尼龙6复合材料,其中,纳米SiO2的质量分数为2。
2.The improved method of storing dealcoholizing one component RTV silicone rubber (i e adopting hexamethyldisilazane,trialkyl silicate,alkoxy silicate,isocyanato alkyl alkoxy silane,calcium chloride,magnesium chloride as alcohol scavenger and proper titanate as catalyst) and the dispensing of dealcoholizing one component RTV silicone rubber by double screw extruder were introduce介绍了改进脱醇型单组分室温硫化 (RTV - 1)硅橡胶贮存稳定性的方法 (包括采用六甲基二硅氮烷、三烷基硅酸酯、烷氧基硅酸酯、异氰酸根合烃基烷氧基硅烷、氯化钙、氯化镁作醇清除剂及选择适当的钛酸酯作催化剂 )和采用双螺杆挤出机配制脱醇型RTV - 1硅橡胶的方法。
3.The composition of transparent,heat resistant and flame retardant PVC for cable produced with flame retarding technology,such as filling flame retardant plastifier,filling inorganic flame retardant,and so on,and their extruding pellet technology in double screw extruder were investigated.对采用阻燃增塑剂、无机阻燃剂等阻燃技术生产的透明和耐温的阻燃PVC电缆料的配方及其在双螺杆挤出机上的挤出造粒工艺进行了研究 ,并加工出具有良好机械性能、电性能和阻燃性能的电缆
5)single screw extruder单螺杆挤出机
1.Experimental Study on Melting Process in Vibration Induced Single Screw Extruder;振动诱导单螺杆挤出机熔融过程实验研究
2.Numerical simulation of three-dimensional flow insingle screw extruder by finite volume method;单螺杆挤出机中三维流动有限体积数值模拟
3.Based on finite difference method of numerical simulation, the semi-analytical method is proposed in the paper, which is adapted to compute the residence time distribution(RTD) of polymer melt in asingle screw extruder, then the RTD under different operation parameters are obtained to characterized the mixing of polymer melt in the course of processing.基于有限差分数值模拟技术,提出了计算非牛顿流体在单螺杆挤出机内停留时间分布的半解析方法,得到了不同操作参数下的停留时间分布,该分布可用来表征聚合物熔体在加工过程中的混合情况。
6)tri-screw extruder三螺杆挤出机
1.Three-dimension isothermal and non-Newtonian flow of polyethylene melt in new-style intermeshing co-rotatingtri-screw extruder was simulated using Computational Fluid Dynamics(CFD) method.利用计算流体力学的方法对聚合物熔体在三螺杆挤出机中的流动规律进行了数值模拟,分析了物料在三螺杆中心区的流动和混合情况。
2.The filling property and dispersion performance of thetri-screw extruder in preparation of color particles based on the experimental study were discussed.文章论述了色母粒制备中三螺杆挤出机的填充和分散特性。
3.Three-dimensional isothermal flow of polymer melt in the kneading-disc element of an intermeshing co-rotatingtri-screw extruder was simulated by using finite element package POLYFLOW.引言近年来 ,人们在传统的双螺杆挤出机的基础上研究开发了三螺杆挤出机[1,2 ] ,以适应高速发展的聚合物工业对混合效果提出的更高要求 。
延伸阅读
螺杆挤出机分子式：CAS号：性质：螺杆挤出机分为冷喂料螺杆挤出机和热喂料螺杆挤出机两种，都用于挤出橡胶半制品和制品。冷喂料螺杆挤出机可喂入不经热炼的胶料，通过螺杆挤压、剪切和搅拌等作用，使胶料受热和塑化，并由口型连续挤出。主要由螺杆、机筒、机头、喂料机构、传动装置和温度控制系统等组成(见图)。冷喂料挤出机螺杆长径比一般为8～18，挤出的制品质量好，不需配备热炼机。热喂料螺杆挤出机须喂入经热炼的胶料，通过螺杆挤压、剪切和搅拌等作用，使胶料进一步塑化，并由口型连续挤出。主要由螺杆、机筒、机头、喂料机构和传动装置等组成。热喂料挤出机螺杆长径比一般为4～6，挤出的制品质量可满足工艺要求，需配备热炼机。
