聚合物共混物,polymer blends
1)polymer blends聚合物共混物
1.Reactive compatibilization,its mechanism and morphology control factors inpolymer blends were briefly reviewed.综述了聚合物共混物的反应性增容及相形态控制的研究现状。
2.The diffusion of a small molecule solute through thepolymer blends was studied, and a new dissolution-diffusion model was established, which gave the correlation among the apparent diffusion activation energy, the partial molar enthalpy of mixing, temperature and the diffusion flux.分析了溶剂分子透过聚合物共混物的溶解-扩散行为,建立了溶剂分子扩散通量与其表观扩散活化能、偏摩尔混合焓以及温度之间的关系式。
3.The miscibility, crystallization, biodegradability ofpolymer blends containing biodegradable poly ( β hydroxybutyrate) (PHB) or poly ( β hydroxybutyrate co β hydroxyvalerate) (P(HB co HV)) are reviewed.综述了含可生物降解聚合物如聚β羟基丁酸酯或聚（β羟基丁酸酯ｃｏβ羟基戊酸酯）聚合物共混物的相容性、结晶行为及生物降解性。
2)Polymer Blend聚合物共混物
1.The effect of screw configuration on the dispersed particle size and its distribution in polymer blends prepared by co-rotating twin-screw extruder using different configurations was studied.采用啮合同向双螺杆挤出机不同的螺杆组合形式,研究了熔融塑化区中捏合段数量对双螺杆挤出聚合物共混物表层和内层分散相粒子粒径及其分布的影响。
2.The effect angles of kneading blocks on the particle size and distribution in bulk and surface of polymer blends were studied.采用同向啮合双螺杆挤出机的不同螺杆组合形式,研究了捏合错列角对双螺杆挤出聚合物共混物表层和内层分散相粒子粒径及其分布的影响。
3.The research progresses of inflluence of the shear flow on the phase behavior of polymer blends are reviewed in three aspects: thermodynamic theory, experimental methods and influencing factors on the miscibility of polymer blends under shear flow field.从热力学理论、实验方法以及影响因素等 3个主要方面 ,综述了自 2 0世纪 80年代以来开展的剪切流动对聚合物共混物相行为影响的研究情况 ;阐述了目前应用较为广泛的热力学理论 ;着重介绍了各种先进的在线检测方法的原理、优缺点及其应用 ;较为详细地总结了聚合物共混物相行为对剪切速率、剪切应力、温度以及组成的依赖关系 ;指出了存在的一些问题 ;展望了该领域发展的趋势和方向。
3)Polymer Blend聚合物共混
1.Progress in Research of Application of Reactive Compatibilizers inPolymer Blending;反应性增容剂在聚合物共混中的应用研究进展
bining the calculated results with the brittle tough transition equation, the effect of the mechanical properties of dispersed phase on brittle tough transition of polymer blends was studied.从Ｇｏｏｄｉｅｒ方程出发，研究了球形分散相周围基体中的形变能密度分布及其与分散相力学性能的关系，将所得结果结合前文给出的聚合物共混体的脆韧转变方程讨论了分散相的力学性能对聚合物共混体脆韧转变的影响，结果与实验一致。
3.Based on Wu′s percolation model we studied the brittle tough transition of polymer blends from the angle of energy transformation and obtained an equation which shows the relations among material parameters and related physical factors at brittle tough transition.根据吴守恒聚合物共混体的脆韧转变的逾渗模型，从能量转换的角度研究了聚合物共混体的脆韧转变过程，并得到在脆韧转变点材料参数及有关的物理量之间关系的方程式，从这一方程出发，讨论了增塑剂、形变速率对聚合物共混体脆韧转变的影响，结果与实验一致。
英文短句/例句
1.Effect of Different Fluorine Containing Polymer on Poly(Ether-Ether-Ketone) Crystallization Behavior in their Blends含氟聚合物共混对聚醚醚酮结晶行为的影响
2.By "multicomponent systems" polymer chemists mean polymer blends, copolymers and reinforced composites.聚合物化学工作者所称的“多组分体系”是指聚合物共混体，共聚物和增强复合材料。
3.Study on Rheology of Partially Miscible Polymer Blend;部分相容聚合物共混体系的流变学研究
4.Application of DSC in the Studies of Transesterification Reaction in Polymer BlendsDSC在研究聚合物共混体系酯交换反应中的应用
5.Effect of Polypropylene Graft Copolymer on Mechanical Properties of Blebd Alloys;聚丙烯接枝共聚物对共混合金力学性能的影响
6.Blend is a mixture of two or more polymers.共混是两种或两种以上高聚物的混合物。
7.Study on Thermal Degradation and Blending Modification of Polyesters;聚合物材料的热老化及共混改性研究
8.Preparation and Studies of PA11/PVC Polymer Blends;PA11/PVC共混聚合物的制备与研究
9.Synthesis of PLA-SPP Copolymer and its Role in SPI/PLA BlendsPLA-SPP共聚物的合成及其在SPI/PLA共混中的应用
10.Synthesis of A-C Block Copolymer by RAFT Polymerization and Its Effect on the Morphology of PS/PBA Blends;RAFT聚合制备复合嵌段聚合物相相容剂及其增容PS/PBA共混物研究
11.Studies on Morphology of Amphiphilic Copolymer Blends Based on PEG;基于聚乙二醇双亲性聚合物及其共混物的凝聚态研究
12.Study on Preparation, Characterization and Crystallization Behavior of Polymer Nanoblends;聚合物纳米共混物的制备表征及结晶行为研究
13.Effect of PP graft copolymer on phase morphology of PP/PS blending systemPP接枝聚合物对PP/PS共混物相形态的影响
14.A Study on Phase-mixing of Poly(∈-caprolactone)/Poly(vinyl chloride)after the Melting of Crystals聚已内酯/聚氯乙烯共混物晶体熔化后相混合情况
15.Study of Phase Separation Behavior of Polymer Blends and Heterogeneous Polymerization of Polymer Hydrogels by Optical Methods;PMMA/SAN共混物相分离及聚合物水凝胶非均匀聚合的光散射/折射研究
16.Study on the Synthesis of Copolyermer with Core-Shell Structure and It"s Modification to Polyvinyl Chloride by Blending;纳米复合核—壳共聚物的制备及其与聚氯乙烯共混改性的研究
17.Syntheses of Functional Oligomers and Their Applications as Reactive Compatibilizer for Polyolefin/Nylon 66 Blends;功能共聚物的合成及其在聚烯烃/尼龙66共混体系中的应用
posite Polymer Electrolyte of Polysilaether Containing Moiety Si-H Bonds in the Side Chain and Polyethylene Oxide Ⅰ.Ionic Conductivity Study含硅氢键聚二硅氧烷/聚醚共混聚合物电解质 Ⅰ.离子电导率研究
相关短句/例句
Polymer Blend聚合物共混物
1.The effect of screw configuration on the dispersed particle size and its distribution in polymer blends prepared by co-rotating twin-screw extruder using different configurations was studied.采用啮合同向双螺杆挤出机不同的螺杆组合形式,研究了熔融塑化区中捏合段数量对双螺杆挤出聚合物共混物表层和内层分散相粒子粒径及其分布的影响。
2.The effect angles of kneading blocks on the particle size and distribution in bulk and surface of polymer blends were studied.采用同向啮合双螺杆挤出机的不同螺杆组合形式,研究了捏合错列角对双螺杆挤出聚合物共混物表层和内层分散相粒子粒径及其分布的影响。
3.The research progresses of inflluence of the shear flow on the phase behavior of polymer blends are reviewed in three aspects: thermodynamic theory, experimental methods and influencing factors on the miscibility of polymer blends under shear flow field.从热力学理论、实验方法以及影响因素等 3个主要方面 ,综述了自 2 0世纪 80年代以来开展的剪切流动对聚合物共混物相行为影响的研究情况 ;阐述了目前应用较为广泛的热力学理论 ;着重介绍了各种先进的在线检测方法的原理、优缺点及其应用 ;较为详细地总结了聚合物共混物相行为对剪切速率、剪切应力、温度以及组成的依赖关系 ;指出了存在的一些问题 ;展望了该领域发展的趋势和方向。
3)Polymer Blend聚合物共混
1.Progress in Research of Application of Reactive Compatibilizers inPolymer Blending;反应性增容剂在聚合物共混中的应用研究进展
bining the calculated results with the brittle tough transition equation, the effect of the mechanical properties of dispersed phase on brittle tough transition of polymer blends was studied.从Ｇｏｏｄｉｅｒ方程出发，研究了球形分散相周围基体中的形变能密度分布及其与分散相力学性能的关系，将所得结果结合前文给出的聚合物共混体的脆韧转变方程讨论了分散相的力学性能对聚合物共混体脆韧转变的影响，结果与实验一致。
3.Based on Wu′s percolation model we studied the brittle tough transition of polymer blends from the angle of energy transformation and obtained an equation which shows the relations among material parameters and related physical factors at brittle tough transition.根据吴守恒聚合物共混体的脆韧转变的逾渗模型，从能量转换的角度研究了聚合物共混体的脆韧转变过程，并得到在脆韧转变点材料参数及有关的物理量之间关系的方程式，从这一方程出发，讨论了增塑剂、形变速率对聚合物共混体脆韧转变的影响，结果与实验一致。
4)polymer blend共混聚合物
1.The researches on multiphase morphologies ofpolymer blend/clay nanocomposites are re- viewed.论述了聚合物共混体系/黏土纳米复合材料内部多相结构形态研究的最新进展；从共混聚合物基体对黏土的分散形态以及黏土对不相容共混基体相结构的影响两方面总结了多相形态的影响因素；探讨了相形态改善、反转的机理。
2.carbon black (CB) was pre-treated by Titanate coupling agent and electrically conductive master batches (ECMB) for fiber were prepared by melt-extruding pre-treated CB with Poly(ethylene terephthalate) (PET), polyethylene (PE), andpolymer blend (PET/PE).将偶联剂处理后的碳黑分别与聚酯、聚乙烯及聚酯/聚乙烯共混聚合物,通过双螺杆熔融共混, 制备了纤维级导电母粒。
5)polymer blends共混聚合物
1.The ofpolymer blends,m,is calculated from the η of component polymers by using mass weighted averaging method.共混聚合物的平均相对分子质量m由工业品聚合物的η按质量权重平均法计算。
2.Emphasis is put on the studies usingpolymer blends as the matrix to lower the carbon black loading through the heterogeneous dist.重点介绍了使用共混聚合物作基体,并利用炭黑在共混基体中的非均相分布来降低炭黑用量的研究。
3.We presented an Xray microanalysis of the phase structures of nylon6/nylon66/nylon1010 terpolyamide/PMMApolymer blends by scanning electron microscopy and Xray energy dispersive spectrometry with image processing program.结果表明:X射线能谱微区分析方法可用于准确定性共混聚合物的相归属,为研究共混聚合物的相结构和相容性提供了一种新方法。
6)polymer blending聚合物共混
延伸阅读
聚合物共混物分子式：CAS号：性质：一般是指结构不同的均聚物或共聚物的物理混合体。通常是为了改进某一聚合物的某方面物理机械性能而与另外一种或多种聚合物、改性剂混合，得到具有合适相结构和满意性能的混合材料。例如在聚苯乙烯中混入橡胶以增加其韧性。共混物是聚合物复合材料的一种，聚合物共混物的特点在于将现有的已经工业化的聚合物进行改性，不仅可以获得使各组分优缺互补、性能优异的新材料，而且还可以使之具有原组分所没有的性能。
