微粒增强,particle reinforcing
1)particle reinforcing微粒增强
1.Recently the way to improve the mechanical properties and heat-resistant properties to for rigid foam plastic are fiber reinforcing, particle and nano-particle reinforcing, polymer alloy foam, and new type of foam plastics.近年国内为提高硬质泡沫塑料的力学性能和耐热性能 ,采取的主要方法有 :纤维增强、微粒和纳米微粒增强 ,以及制备聚合物合金泡沫塑料、新型泡沫塑料等。
英文短句/例句
1.Study on Enhancement of Gas-Liquid Mass Transfer by Catalyst Particles in Slurry Reaction System;浆料反应体系中催化剂微粒增强气液传质研究
2.Study on Enhancement of Gas-Liquid Mass Transfer by Adsorptive Particles in Slurry Bubble Column;浆料鼓泡塔内吸附性微粒增强气液传质研究
3.Progress of Research on Cell Structure and Properties of Particle Reinforced Rigid Polyurethane Foams微粒增强硬质聚氨酯泡沫泡孔结构及其性能的研究进展
4.Research on Image Enhancement Based on Particle Swarm Optimization基于微粒群算法的彩色图像增强研究
5.Microstructure of the Interfacial Region between CBN Grains and AgCuTi Alloy Reinforced by TiN ParticlesTiN颗粒增强AgCuTi合金钎焊CBN磨粒的界面微结构
6.Capturing Fine Particles Using Magnetical Enhancement Corona Pre-Charger in the Front of an Electrostatic Enhancement Filter;静电增强过滤器前应用磁增强预荷电技术捕集微细颗粒的研究
7.Study on the Preparation of Sub-micron Particle Reinforced Aluminum Matrix Composites;亚微米颗粒增强铝基复合材料的制备技术研究
8.A Gray-Image Enhancement Based GA and PSO Hybrid Algorithm基于遗传微粒群混合算法的灰度图像增强
9.Effect of Grafted Particles PGMA/Al_2O_3 on Toughness and Reinforce of Encapsulating Materials of Epoxy Resin接枝微粒PGMA/Al_2O_3对环氧树脂电子灌封材料的增强增韧作用
10.Microstructures and Mechanical and Corrosion Behavior of Silicon Carbide Particle Reinforced Aluminum Metal Matrix Composites;碳化硅颗粒增强铝基复合材料的微结构和力学与腐蚀行为研究
11.Nanowell Arrays Construction and SEF on FL of Ag Nanoparticle Array;纳米微孔材料构筑与银纳米粒子组装阵列上表面增强荧光研究
12.Microstructures and Mechanical Properties of SiC Particulate Reinforced Magnesium Matrix Composite;SiC颗粒增强镁基复合材料的显微组织及其力学行为
13.Microstructure and Properties of In-situ Synthesized VC Particles Reinforced Ferrous Matrix Composites;原位合成VC颗粒增强铁基复合材料的微观组织与性能
14.Fabrication and Microstructure of In-situ Particulates Reinforced 7055 Matrix Composites Synthesized by Sonochemistry超声化学原位合成颗粒增强7055基复合材料及其微结构研究
15.Effect of thermohydrogen on microstructure and tensile properties of particle-reinforced titanium composite热氢处理对颗粒增强钛基复合材料显微组织和力学性能的影响
16.Microstructures and properties of capacitor discharge welding joint of Al_2O_3 particle reinforced Al-matrix compositesAl_2O_3颗粒增强铝基复合材料储能焊接头微观组织及性能
17.Microstructure-based Simulation of Plastic Deformation Behavior of SiC Particle Reinforced Al Matrix Composites基于微观组织的SiC颗粒增强铝基复合材料的流变特性研究(英文)
18.Microstructure and Mechanical Properties of High Volume SiC_p Reinforement Magnesium Matrix Composites高体分SiC颗粒增强镁基复合材料的显微组织与力学性能
相关短句/例句
particulate rein-forced composites微粒增强复合材料
3)EPSO增强型微粒群优化
1.An enhanced particle swarm optimization algorithm (EPSO) is proposed based on the analysis of PSO.对微粒群优化算法(PSO)进行分析,提出一种增强型微粒群优化算法(EPSO)。
4)particulate reinforced颗粒增强
1.Study on SiCparticulate reinforced AZ91 magnesium matrix composite;SiC颗粒增强AZ91镁基复合材料的研究
2.Study onparticulate reinforced iron-matrix coating produced by plasma jet surface metallurgy;等离子束表面冶金原位颗粒增强铁基涂层的研究
3.Melt-stirred composing in semi-solid for Al_2O_3particulate reinforced aluminium matrix composites;Al_2O_3颗粒增强铝基复合材料的半固态搅熔复合
5)particle reinforcement颗粒增强
1.A model was established to examine the influence ofparticle reinforcement on the yield strength of aluminum matrix composites,which was based on the equivalent inclusion approach of ASHALBY and assumption that the reinforcement fracture follow the WEIBULL statistics.通过ASHALBY等效夹杂理论分析复合材料受载时作用在增强体上的应力,并假设增强体的断裂符合WEIBULL分布,在综合考虑复合材料各种强化机制的基础上引入增强体断裂对材料屈服强度的影响,建立了一个复合材料的屈服强度模型,将其应用于SiC颗粒增强Al基复合材料,发现在屈服状态下复合材料的颗粒断裂分数随着增强体的体积含量和粒度的增加而增加,但增强体粒度变化对颗粒断裂影响更大。
6)particle reinforced颗粒增强
1.Preparation methods ofparticle reinforced surface metal matrix composites;外加颗粒增强表层复合材料制备方法
2.Elastoplastic properties ofparticle reinforced titanium matrix composites;颗粒增强钛基复合材料的弹塑性能研究
3.Microstructure ofparticle reinforced Ni-base alloy composite coating by laser cladding;激光熔覆制备颗粒增强Ni基复合涂层的组织结构
延伸阅读
MH微粒硬质造牙材料分子式：CAS号：性质：以甲基丙烯酸甲酯-苯乙烯共聚物为基质，以微粒二氧化硅(1000目以上)作填料，用有机硅烷处理后配制而成。它既能保持陶瓷牙的优点，又兼有塑料牙的长处，其力学性能又接近天然牙，是硬质复合的新型造牙材料。
