热塑性含氟聚氨酯弹性体,thermoplastic fluorinated polyurethane elastomer
1)thermoplastic fluorinated polyurethane elastomer热塑性含氟聚氨酯弹性体
英文短句/例句
1.The Synthesis and Property of Thermoplastic Fluorinated Polyurethane Elastomer热塑性含氟聚氨酯弹性体的制备与性能
2.Study on the Compatibilization of PP/TPU Blends聚丙烯/热塑性聚氨酯弹性体的相容性
3.polyurethane thermoplastic elastomer聚氨基甲酸酯热塑性弹性体
4.Estimation of Enthalpy of Formation for Energetic Thermoplastic Polyurethane Elastomers by Group Additivity Method基团加和法估算含能热塑性聚氨酯弹性体的生成焓
5.Study on Thermoplastic Polyurethane Elastomer Toughening PVC热塑性聚氨酯弹性体增韧聚氯乙烯的研究
6.Preparation of PTFE/TPU Microporous Membranes with Rebound Elasticity;弹性聚四氟乙烯/热塑性聚氨酯多微孔薄膜的研制
7.Study of Nylon 1010/Thermoplastic Polyurethane Elastomer Blend System;尼龙1010/热塑性聚氨酯弹性体共混体系的研究
8.Processing Technigue and Application of TPU Elastomer Sun Yan and Yu Shengquan热塑性聚氨酯弹性体加工成型技术及应用
9.Effect of Sequence Structure of Polyester Polyols on the Properties of Thermoplastic Polyurethane Elastomers聚酯多元醇的序列结构对热塑性聚氨酯弹性体的性能影响
10.testing methods for thermoplastic polyurethane elastomers热塑聚氨酯弹性物试验方法
11.Study on the Compatibility of Ethylene-Vinyl Acetate Rubber and Thermoplastic Polyurethane Elastomer Blends;乙烯—醋酸乙烯酯橡胶与热塑性聚氨酯弹性体的相容性研究
12.Structure and properties of hindered phenol AO-80/polyether-based polyurethane thermoplastic elastomer composites受阻酚AO-80/聚醚型热塑性聚氨酯弹性体复合材料的结构与性能
13.Enhancement of Toughness and Strength of Polyoxymethylene by Thermoplastic Polyurethane Elastomer and Inorganic Filler;热塑性聚氨酯弹性体及无机填料增韧增强聚甲醛的研究
patibilized PP/TPU Blends Through γ-radiation and Compatibilizers;聚丙烯/热塑性聚氨酯弹性体的γ-辐照增容与增容剂增容
15.Preparations and Properties of Novel Thermoplastic Polyurethane and Their BaTiO_3 Composite Elastomers;热塑性聚氨酯及其钛酸钡复合弹性体的制备与性能
16.Synthesis and mechanical property of thermoplastic polyurethane as thermoplastic elastomer propellant binder热塑性聚氨酯弹性体粘合剂的制备及力学性能的研究
17.Research on the Structure, Properties and Blending Technology of Thermoplastic Polyurethane Elastomer and Chlorinated Polyethylene热塑性聚氨酯弹性体与氯化聚乙烯橡胶结构与性能及共混技术的研究
18.The Effect of the Heat-resistance Property of Stearyl Alcohol to Polyurethane Elastomer Based on TDI十八醇对TDI型聚氨酯弹性体耐热性能的影响
相关短句/例句
energetic thermoplastic polyurethane elastomers(ETPE)含能热塑性聚氨酯弹性体(ETPE)
3)TPU热塑性聚氨酯弹性体
1.Preparation of thermoplastic polyurethane elastomer(TPU) for ink;油墨用热塑性聚氨酯弹性体的研制
2.Two methods of different dynamic vulcanization processing ofTPU/EVM blends in HAAKE Rheocord90 were compared in which DCP was chosen as the curing agent.比较了通过HAAKE Rheocord90转矩流变仪用两种不同的动态硫化混炼方法对热塑性聚氨酯弹性体/乙烯-醋酸乙烯酯共聚物(TPU/EVM)共混体系性能的影响,硫化剂选用过氧化二异丙苯(DCP);探讨了密炼室转子转速和混炼温度对动态硫化共混物性能的影响。
3.Polypropylene/TPU/nano-silica composites were prepared by melt-blending process,mechanic,crystallization and rheology properties of composites were studied.采用熔融共混法制备了聚丙烯(PP)/热塑性聚氨酯弹性体(TPU)/纳米SiO2复合材料,研究了复合材料的力学性能、结晶性能、流变性能。
4)Thermoplastic Polyurethane热塑性聚氨酯弹性体
1.The blends with different ratios of high density polyethylene/thermoplastic polyurethane(HDPE/PUR-T) were prepared through melt mixing by using a twin-screw extruder,with E/VAC-g-MAH as the compatibilizer.以高密度聚乙烯(HDPE)和热塑性聚氨酯弹性体(PUR-T)为主要原料,以马来酸酐接枝(乙烯/乙酸乙烯酯)共聚物(E/VAC-g-MAH)为增容剂,采用双螺杆挤出熔融共混技术制备了HDPE/PUR-T和HDPE/PUR-T/(E/VAC-g-MAH)等共混材料,利用60Co-γ射线源在较低辐照剂量(小于等于25 kGy)下对共混材料进行了γ-辐照。
2.polypropylene/ thermoplastic polyurethane (PP /PUR-T) blends were prepared with co-rotating twin screws extruder.利用双螺杆挤出机制备了聚丙烯(PP)/热塑性聚氨酯弹性体(PUR-T)共混材料,研究了这类共混材料经1~25kGy剂量的γ射线辐照前后的力学性能、动态力学行为与形态。
3.The properties and morphology of segmented polyether thermoplastic polyurethane elastomers consisting of EO/THF copolyether and polyethelene glycol(PEG) as the soft segments and isophorone diisocyanate extended with 1,4 butanediol as the hard segments were studied by means of tensile testing, TEM, WAXD and DSC.采用熔融预聚二步法合成了以环氧乙烷 -四氢呋喃无规共聚醚和聚乙二醇混合聚醚为软段 ,异佛尔酮二异氰酸酯和 1,4 -丁二醇为硬段的热塑性聚氨酯弹性体 ,利用 TEM、WAXD、DSC对聚合物进行了表征 ,并测试了其力学性能。
5)thermoplastic polyurethane elastomers热塑性聚氨酯弹性体
6)thermoplastic polyurethane elastomer热塑性聚氨酯弹性体
1.Influence of CL-20 coated withthermoplastic polyurethane elastomers (TPU) on mechanical properties of NEPE propellant;热塑性聚氨酯弹性体包覆CL-20及对NEPE推进剂性能影响
2.Polyoxymethylene(POM) andthermoplastic polyurethane elastomer(TPU) were blended in twin-screw extruder.聚甲醛(POM)和热塑性聚氨酯弹性体(TPU)于不同温度下在双螺杆挤出机中共混,用扫描电镜(SEM)考察了共混试样的相形态,并对试样分散相粒径进行了统计,研究了分散相粒径随加工温度的变化。
3.With polyamide 1010(PA1010) as matrix material and with ester-basedthermoplastic polyurethane elastomer (TPU) as toughener,PA1010/TPU blends were prepared using a Haake PTW16/25p twin-screw extruder.以尼龙1010(PA1010)为基体,以聚酯型热塑性聚氨酯弹性体(TPU)为增韧剂,采用HaakePTW16/25p型双螺杆挤出机制备了PA1010/TPU共混增韧尼龙材料,测试了PA1010/TPU共混物的表观粘度、非牛顿指数等流变参数,并重点讨论了其流变性能。
延伸阅读
热塑性分子式：CAS号：性质：聚合物可反复受热软化或熔化和冷却凝固变硬的性质。一般线型聚合物或支型聚合物具有此性质。
